Read every signal at a glance
The live map is your operations centre. Pulse halos call out actively-reporting vehicles, the layer switcher flips between roadmap / satellite / hybrid / terrain, and the safety advisor warns when conditions make travel risky.
Marker meanings
Every pin on the live map answers two questions: what is the vehicle doing (engine state), and is the tracker still talking to us (device state). Colour names the live state; the legend in the top-right of the map matches this list exactly.
Live states — vehicle is being tracked normally
- MOVING (green) — ignition ON, vehicle in motion (> 5 km/h).
- IDLING (yellow) — ignition ON, vehicle stationary.
- PARKED (red) — ignition OFF, vehicle stationary. The tracker is still healthy and reporting — the truck is just sitting cold.
- INACTIVE (blue) — tracker still alive but no activity in the last 24 hours.
Not actively reporting — three distinct conditions
These three colours mean we're not getting a live position right now, but for very different reasons. The action you take is different in each case.
- NOT TRACKED (slate) — the vehicle is in your fleet but no tracker has been paired to it yet. Pair one in Settings → Devices. This is an admin step, not a fault.
- AWAITING FIRST FIX (amber) — the tracker is paired but has never sent us anything. Check power at the install, the SIM, and the APN. New installs sit here until the device gets its first lock and uploads.
- TRACKER OFFLINE (grey) — the tracker was reporting and has now gone silent for more than 30 minutes. The hardware itself has stopped responding. Check power to the device, SIM coverage, antenna, or hardware fault. This is not the same as "the engine is off" — engine state is independent and shows up on MOVING / IDLING / PARKED.
Halo + label rules
- Pulsing halo — tracker has heartbeated within the live window. Only the four live states (MOVING / IDLING / PARKED / INACTIVE) pulse; the three "not actively reporting" states hold a still dot so the marker never visually claims liveness it doesn't have.
- Permanent label — the registration number above the dot. Auto-shows for moving vehicles; tap "Labels on" in the legend to keep them visible for parked ones too.
- Green ring — vehicle is currently inside an active geofence; the popup names the zone.
Layer switcher
Bottom-left of the map. Open the menu to flip between four base layers and three overlays:
- Roadmap (default) — OpenStreetMap.
- Satellite — Esri imagery, useful for unmapped roads.
- Hybrid — satellite + road labels.
- Terrain — OpenTopoMap, useful for mountain routes.
- Overlays: Traffic / Weather: clouds / Weather: precipitation. Toggle independently of the base layer.
Follow a vehicle (movie mode)
- Tap the dot for the vehicle you want to follow.
- In the popup, tap ◉ Follow. The marker lights up amber.
- The camera glides with the truck on every telemetry tick — your zoom level is preserved.
- A pill bottom-left shows "Following GT-1234 · 62 km/h ↗" with a Stop button.
Drawing a geofence zone
Geofence buttons live on the left of the map. Each is labelled on phones and tooltipped on desktop.
- Tap the Polygon or Circle tool.
- For polygon: tap to drop vertices, click the first vertex to close. For circle: tap + drag to set radius.
- Name the zone in the dialog and save. The new geofence appears on the map immediately and the Getting-Started checklist ticks the "Set up geofence" step in real-time.
Weather safety advisor
The yellow / red banner at the top of the map is the rule-based safety advisor. Conditions like heavy rain (≥ 10 mm/h), gusts (≥ 60 km/h), thunderstorms, or extreme heat (feels like ≥ 42°C) flip it to "Strongly advised against driving"; lighter conditions yield "Drive with caution"; otherwise it stays hidden.